APPLICATIONS



T100 / T110 / T120

Applications:

- Inside of bags and briefcases,
- Filling forms,
- Internal insoles,
- Filling belts,
- Binding, among others.

Thickness: 0.3mm; 0.5mm; 0.75mm; 1.0mm.
Mass of color: the line 100 can be produced in natural colors (100, 110, 120); chromium (102, 112, 122); Black (104, 114, 124) and coffee (105, 115, 125).

Technical data:

Stretching - DIN 53328. Unit%. It is the elongation percentage of the material on the initial length of the specimen, to the breaking of it, when subjected to tensile force.

Specification No specification are indicative values ​​for determining the elasticity of the material.

14 - Tensile strength - DIN 53328. Each N / mm². Determines the tensile force per unit area required to break the material pre-established specimens.

Specification: For synthetic materials DIN 53857. Application in leather: Minimum 120N / 10mm. Woven fabric: minimum 80N / 10mm. In applying for lining and reverse: minimum 40N / 10mm. Leather to DIN 53 328, any type of leather and application: minimum 150 N / mm².

15 - Continued tear - DIN 53356. Drive N. determines the force required to continue the tearing starting from an initial cut. Its importance is to check the strength of the material from living and perfuros corners.

Specification: For synthetic materials used in Leather with lining: minimum 18 N applied in Leather unlined: Minimum 25 N and applied in liner and Averse: minimum 15 N.

16 - friction fastness of the dyeing and finishing - DIN 53339 / 1978. finishing Determination of resistance in friction Veslic apparatus where a standard tissue under constant weight rubbing the material to be tested. This fabric can be dry or soaked in water or artificial sweat solution. Is achieved so verify that the finish is coming out, staining the tissue and or damage occurs in the finish. The result is obtained by comparative analysis of the fabric dyeing, in relation to the white zone of the same, with Gray Scale.